2 window types and configuration, Window types and configuration -38, Nexiting – Yokogawa GC8000 Process Gas Chromatograph User Manual
Page 148: Nlatest analysis results window, See also

<5. Display and Operations while Connected to GC1000 Mark II>
5-38
IM 11B06C01-01E
n
Exiting
l
Operation procedure
Click on the Exit command in the File menu.
The Analysis Results window is then closed.
5.4.2
Window Types and Configuration
The analysis results windows consist of analysis results acquisition windows (Latest Analysis
Results, Concentration Analysis History, Retention Time History, Laboratory Analysis Results
and Calibration coefficient History) and file reference windows (File Analysis Results, File
Concentration Analysis History, File Retention Time History, File Laboratory Analysis Results and
File Calibration coefficient History).
This section outlines the configuration and display contents of each of these windows.
n
Latest Analysis Results Window
The Latest Analysis Results window displays the latest analysis results that have been obtained
in Process mode by the analyzer, focusing on the stream for which analysis was made. The latest
analysis results are updated each time analysis by the analyzer is complete. If you wish to retain
current data, save the window display so that you can refer to it freely later.
SEE ALSO
• Display contents below for display data
Display contents below for display data
l
Window configuration
The following shows the configuration of the Latest Analysis Results window.
F5-4-3.ai
The remaining portions can be brought into view by using the scroll bar.
5th Edition : Nov. 16, 2011-00