Yokogawa GC8000 Process Gas Chromatograph User Manual
Page 18

<1. Overview of the Engineering Terminal>
1-2
IM 11B06C01-01E
l
Remote operation of the LCD window
A GC1000 analyzer’s LCD window is displayed as is on the PC monitor, enabling you to operate
the LCD window for each analyzer from a remote location from the site.
l
Analyzer Operation window allowing the operation status to be seen at a
glance
The analyzer’s current operation mode, the operation status of the valves, detectors, etc. and a
chromatogram are displayed in a single window (Analyzer Operation window); operation status
can be checked at a glance. Moreover, you can change the operation mode, open and close
valves, display a detailed chromatogram, and so on by simply clicking on the window.
l
Displaying a detailed chromatogram and saving data
An overview of a chromatogram can be displayed in the Analyzer Operation window. In addition,
you can display a detailed chromatogram in the Chromatogram Display window. Using this
window, you can partially enlarge a chromatogram, change the scale, or save chromatogram
data.
l
Storing analysis data and creating graphs
The results of analysis using an analyzer are stored in the analyzer server. The analyzer server
can store the peak names for up to 255 events and the analysis time for up to 250 events for
each analyzer. Analysis data stored in the analyzer server can be read out and displayed on
a graph at any time, and data can also be saved to a file and then opened in general-purpose
software such as Excel for more sophisticated data processing.
5th Edition : Nov. 16, 2011-00