Nclosing history data, Caution, Nreading (opening a file) – Yokogawa GC8000 Process Gas Chromatograph User Manual
Page 158

<5. Display and Operations while Connected to GC1000 Mark II>
5-48
IM 11B06C01-01E
n
Closing History Data
If history data read into the Concentration Analysis History window or Retention Time History
window or Calibration coefficient History window is no longer required, proceed as follows to
close it.
CAUTION
History data is shared between the Concentration Analysis History window and the
Retention Time History window; if history data in either window is cleared, the other window is
also cleared accordingly.
l
Operation procedure
Open the Concentration Analysis History window or Retention Time History window or Calibration
coefficient History window and click on the Close History command in the File menu.
History data is then closed, clearing the display.
TIP
Only one series of history data can be read at a time. Reading new history data causes the previous history data
to be closed automatically.
n
Reading (Opening a File)
A saved file can be read in a file reference window using the following procedure:
l
Operation procedure
(1) Select the file reference window you wish to read and click on the Open command in the
File menu.
• This operation can also be conducted by clicking the button on the toolbar.
A dialog box for specifying the file to read appears.
F5-4-12.ai
(2) Specify the file name to read and click the OK button.
The specified file is then read, displaying the saved data.
TIP
• Data in an opened file can be modified.
5th Edition : Nov. 16, 2011-00