Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 19)

<1. Overvies of the Engineering Terminal>
1-3
IM 11B06C01-01E
1.2 Engineering Terminal Group
Take a look at the types of software comprising the Engineering Terminal Group and the windows
making up the Engineering Terminal.
n Software Configuration
The Engineering Terminal consists of the following six types of software:
Software Type Function
Engineering Terminal
(ASET)
This is the main core of the Engineering Terminal.
It develops various windows based on the Overview window that displays
the operation status of multiple analyzers, as well as the analysis results.
Analysis Results
window (ASETAna)
This window stores analysis results. It can be started independently if you
wish to process analysis results saved in a file.
CAPTURE IT! (CAPTIT) This is a tool for taking a hard copy.
For more information, refer to the CAPTURE IT! manual.
Ethernet LCD Emulator
(EtherLCD)
This software runs independently of the Engineering Terminal. It can
emulate an analyzer LCD panel (i.e. operate in the same way as on the
analyzer), allowing you to operate the analyzer panel from the PC.
n Engineering Terminal Window Configuration
The Engineering Terminal consists of the following windows:
Window Type Function
Overview window This window is provided to monitor the status of each analyzer connected to
PCAS. It appears when ASET starts.
Analyzer Overview
window
The Analyzer Overview window displays the measurement status of each
GC module (hereafter referred to as GCM) in GC8000. Select the GCM you
want to view the details in this window.
From this window, open your desired subwindow (Analyzer Configuration,
Analyzer Operation, Chromatogram, Analysis Results, or Alarm windows).
Analyzer Operation
window
The Analyzer Operation window is provided to operate or monitor the
operation status of an analyzer.
Switch the window for each GCM.
Chromatogram window The Chromatogram window is provided to monitor the current
chromatogram or to display chromatograms stored in an analyzer
server (hereafter referred to as PCAS). It is also used to reanalyze
chromatograms.
Analysis Results
windows
Displays the latest analysis results, concentration analysis history, retention
time history or calibration coefficient history. Switch the window for each
GCM or system (hereafter referred to as SYS).
Alarm windows Displays alarm status and history of an analyzer.
Switch the window for all analyzers or each GCM.
Analyzer Configuration
window
The Analyzer Configuration window is provided to display the definitions
of GCMs or SYSs in GC8000 or equipment configuration, such as oven,
detectors, and valves.
5th Edition : Nov. 16, 2011-00