Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 User Manual
User's manual
Table of contents
Document Outline
- ZR22G, ZR402G
- Introduction
- r For the safe use of this equipment
- 1. Overview
- 2. Specifications
- 3. Installation
- 3.1 Installation of the Detector
- 3.2 Installation of the Converter
- 3.3 Installation of ZA8F Flow Setting Unit
- 3.4 Installation of ZR40H Automatic Calibration Unit
- 3.5 Installation of E7044KF Case Assembly for the Calibration-gas Cylinder
- 3.6 Insulation Resistance Test
- 3.7 External Dimensions of Detectors with Pressure Compensation
- 4. Piping
- 5. Wiring
- 6. Components
- 7. Startup
- 7.1 Checking Piping and Wiring Connections
- 7.2 Checking Valve Setup
- 7.3 Supplying Power to the Converter
- 7.4 Touchpanel Switch Operations
- 7.5 Confirmation of Converter Type Setting
- 7.6 Confirmation of Detector Type Setting
- 7.7 Current Output Setting
- 7.8 Setting Display Item
- 7.9 Checking Current Loop
- 7.10 Checking Contact I/O
- 7.11 Calibration
- 8. Detailed Data Setting
- 9. Calibration
- 10. Other Functions
- 11. Inspection and Maintenance
- 12. Troubleshooting
- CMPL
- Revision Record