Teledyne LeCroy WaveExpert 100H Operators Manual User Manual

Page 50

Operator’s Manual

WE-OM-E Rev A

(thermal) or intensity-graded display.

QuickZoom

Automatically displays magnified views of up to four signal inputs on multiple
grids. With four input signals, the signals are displayed along with four zoom
traces, each on its own grid. This button turns off all other traces.

General
Control

Buttons:

Print Screen

Prints the displayed screen to a file, a printer, the clipboard, or attaches it as an
e-mail. Select the device and format it in the Utilities --> Hardcopy dialog.

Utilities

For setup of scope features including hardcopy devices and formats, date and
time, and remote control interfaces, etc.; or for checking status, options, etc..

Touch Screen
(toggle switch)

Activates or deactivates the touch screen.

Clear Sweeps

Clears data from multiple sweeps (acquisitions) including: persistence trace

displays, averaged traces, parameter statistics, and Histicons. During waveform
readout, cancels readout.

STANDBY
Lamp:

The STANDBY lamp indicates when the scope has placed itself in standby mode.
In this mode, current settings are retained.

On-screen Toolbars, Icons, and Dialog Boxes

Menu Bar Buttons

The menu bar buttons at the top of the scope's display are designed for quick setup of common
functions. At the right end of the menu bar is a quick setup button that, when touched, opens the
setup dialog associated with the trace or parameter named beside it. The named trace or
parameter is the one whose setup dialog you last opened:

This button also appears as an undo button

after front panel buttons Autosetup and

UICK

OOM

are pressed. If you want to perform an Undo operation, it must be the very next

operation after you perform the Autosetup or QuickZoom operation.