Teledyne LeCroy WaveExpert 100H Operators Manual User Manual
Page 32
Operator’s Manual
30
WE-OM-E Rev A
envelope
exp (base e)
exp (base 10)
fft (basic)
floor
histogram of 2e9 events
integral
roof
segment
(sinX)/X
square
square root
sum (+)
trend (datalog) of 10,000 events
zoom (identity)
Measure Tools (standard)
Display any 8 parameters together with statistics, including their average, high, low, and standard
deviations. Histicons provide a fast, dynamic view of parameters and wave shape characteristics.
amplitude
area
base
cycles
delay
delta delay
delta time @ level
duration
duty cycle
fall time (90-10%, 80-20%, @ level)
first
frequency
last
level @ x
maximum
mean
minimum
number of points
overshoot+
overshoot-
peak-to-peak
period
phase
rise time (10-90%, 20-80%, @ level)
rms
std. deviation
time @ level
top
width
x @ minimum (min.)
x @ maximum (max.)
x at max
x at min
Pass/Fail Testing
Test multiple parameters against selectable parameter limits at the same time. Pass or fail
conditions can initiate actions including: document to local or networked files, email the image of
the failure, or save waveforms.
General
Auto Calibration: Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Power Requirements: Single phase, 100 to 240 V
rms
(±10%) at 50/60 Hz (±5%); or single phase,