Teledyne LeCroy WaveExpert 100H Operators Manual - Manual (Page 251)

Wave Expert
WE-OM-E Rev A
249
Number of Samples
The various math packages can process samples as follows:
Excel 65,535 samples
Matlab 400 MS
Mathcad 5 MS
Calling Excel From Your Instrument
Calling Excel Directly from the Instrument
Excel can be directly called from the instrument in two ways:
Using a function F1 through Fx [The number of
math traces available depends
on the software options loaded
on your scope. See
Specifications.] Excel returns a waveform
Using a parameter P1 through Px [The number of
parameters available depends
on the software options loaded
on your scope. See
Specifications.] Excel returns a parameter
In both cases, one call to Excel can use two separate waveforms as input.
Notes:
Excel has a calculation algorithm of 64,000 points (32,000 if you have created a chart in Excel). Therefore, make sure that
your acquisition has less than this number of points if you are going to use an Excel calculation.
To use this capability, you must have the LeCroy XMAP software option and Excel loaded in your instrument. Select
Minimize from the instrument's File menu to access the Excel program directly.
How to Select a Math Function Call
The Excel math function is selected from the Math Operator menu, where it appears in the
Custom group.
How to Select a Parameter Function Call
The Excel Parameter function is selected from the Select Measurement menu, where it appears in
the Custom group.
The Excel Control Dialog
Once you have invoked an Excel call, you will see a dialog at the right of the screen, allowing you to
control the zoom, Excel properties, linking cells, and scale of the output trace from Excel: