Teledyne LeCroy WaveExpert 100H Operators Manual - Manual (Page 44)

Operator’s Manual
42
WE-OM-E Rev A
For each waveform, you can create multiple labels and turn them all on or all off. Also, you can
position them on the waveform by dragging or by specifying an exact horizontal position.
The labels are preserved when the waveform is saved as a LabNotebook entry and when saved to
file.
To Annotate a Waveform
1. Touch the waveform you want to annotate, then Set label... in the pop-up menu. A dialog
box opens in which to create the label.
If you are creating a label for the first time for this waveform, Label1 is displayed with
default text. If you are modifying an existing label, under Labels touch the label you want to
change.