Teledyne LeCroy WaveExpert 100H Operators Manual - Manual (Page 114)

Operator’s Manual
112
WE-OM-E Rev A
TRACK VIEWS
Creating and Viewing a Trend
1. In the menu bar, touch Measure, then Measure Setup in the drop-down menu.
2. Touch one of parameter tabs P1 through Px.
3. Touch
inside the Source1 data entry field and select an input waveform from the pop-up
menu.
4. Touch inside the Measure data entry field and select a parameter from the pop-up menu.
5. Touch the Trend button at the bottom of the dialog; then, from the Math
selection for Trend menu, select a math function location (F1 to Fx) to store the Trend
display. The Trend will be displayed along with the trace label for the math function you
selected.
6. Touch the newly displayed Trend math function trace label if you want to change any
settings in the Trend dialog:
Note: Turning off a trace for which trend data is being collected will reset the trend. If it is necessary to continue data
collection for the trend, create a zoom trace of the channel trace before turning off the channel trace.
Creating a Track View
This feature is available in the XMAP option.
1. In the menu bar, touch Measure, then Measure Setup in the drop-down menu.
2. Touch one of parameter tabs P1 through Px.
3. Touch
inside the Source1 data entry field and select an input waveform from the pop-up
menu.
4. Touch inside the Measure data entry field and select a parameter from the pop-up menu.