Teledyne LeCroy WaveExpert 100H Operators Manual - Manual (Page 28)

Operator’s Manual
26
WE-OM-E Rev A
SPECIFICATIONS
Note: Specifications are subject to change without notice.
Sampling Heads
Module Performance (Guaranteed Values)
Module Rise time RMS noise Aberrations Bandwidth
ST-20 18 ps 700 µV
First 40 ps +/-10%
40 ps to 200 ps +/-5%
200 ps to 10 ns +/-2%
20 GHz
SE-30 12 ps 1 mV
First 40 ps +/-10%
40 ps to 200 ps +/-5%
200 ps to 10 ns +/-2%
30 GHz
SE-50 8 ps 2 mV
First 40 ps +/-10%
40 ps to 200 ps +/-5%
200 ps to 10 ns +/-2%
50 GHz
SE-70 5 ps 3 mV
First 40 ps +/-10%
40 ps to 200 ps +/-5%
200 ps to 10 ns +/-2%
70 GHz*
SE-100 4 ps 3 mV
First 40 ps +/-10%
40 ps to 200 ps +/-5%
200 ps to 10 ns +/-2%
100 GHz*
* limited by connector molding
ME-15 Module Extender: 22 ps
Vertical System
Maximum Input Channels: 4
Maximum Input Range: +/- 2 V
Dynamic Range: 2 V
p-p
Input Impedance: 50 ohms ±1%
Input Coupling: DC
Max Input Voltage: +/- 2.5 V
Static Sensitivity: The sampling module inputs are highly static sensitive. A grounding strap
must be worn at all times when handling the modules.
Installation (Overvoltage) Category: CAT I