Teledyne LeCroy WaveExpert 100H Operators Manual - Manual (Page 34)

Operator’s Manual
32
WE-OM-E Rev A
Certifications
EC Declaration of Conformity
Meets intent of the European Council Directives 73/23/EEC for
product safety and 89/336/EEC for electromagnetic compatibility.
This declaration is based upon compliance of the WaveExpert
oscilloscope to the following standards:
EN 61326/A3:2003 EMC requirements for electrical equipment for
measurement, control, and laboratory use.
Emissions:
EN 55011/A2:2002 Radiated & Conducted Emissions (Class
A*)
EN 61000-3-2/A2:2005 Harmonic Current Emissions
Immunity:
EN 61000-4-2:1999 Electrostatic discharge (+4 kV contact
discharge; +8 kV air discharge)
EN 61000-4-3: 2002+A1:2003 RF Radiated Fields
(3 V/m, 80 MHz to 1 GHz, 80% amplitude modulated)
EN 61000-4-4: 2004 Electrical Fast Transient/Burst
(1 kV on AC mains)
EN 61000-4-5: 1995+A1:2001 Surge
(1 kV differential mode, 2 kV common mode)
EN 61000-4-6: 1996+A1:2001 RF Conducted Field
(3 V, 150 kHz to 80 MHz, amplitude modulated with 1 kHz sine
wave)
EN 61000-4-11: 2004 Mains Dips and Interruptions (100%
interruption for 1 full AC cycle)
EN 61010-1: 2001 Safety requirements for electrical equipment
for measurement control and laboratory use
With the following limits:
Installation (Overvoltage) Category II
(Line voltage in equipment and to wall outlet)
Installation (Overvoltage) Category I
(All mains isolated terminals)