Teledyne LeCroy WaveExpert 100H Operators Manual - Manual (Page 107)

Wave Expert
WE-OM-E Rev A
105
If you use a name that ends in a number instead of a letter, the instrument may truncate the
number. This is because, by design, the first waveform is automatically numbered 0, the
second 1, etc. For example, if you want to use waveform name "XYZ32" but it is not
preceded by waveforms XYZ0 through XYZ31, the waveform will be renumbered with the
next available number in the sequence.
If you need to use a number in your waveform's name, it is recommended that you append
an alpha character at the end of the number: "XYZ32a" for example.
5. If you are saving to file, touch the Data Format field and select a format type from the
pop-up menu:
.
If you select ASCII or Excel, also touch the SubFormat field and select either Time Data
or Time & Ampl. Then touch the Delimiter field and select a delimiter character from the
pop-up menu: comma, space, semicolon, or tab.
5. Touch the Browse button for the Save file in directory field and browse to the
location where you want the file saved. The file name is assigned automatically
and is shown below the field.
6. Touch
Auto Save
You can also enable Auto Save from this dialog by touching one of the Auto Save buttons:
.
Wrap (old files overwritten) or Fill (no files overwritten).
CAUTION
If you select Fill, you can quickly use up all disk space on your hard disk.