Teledyne LeCroy WaveExpert 100H Operators Manual - Manual (Page 113)

Wave Expert
WE-OM-E Rev A
111
not equipped with a CD drive, you will need a USB CD-ROM to do this (not supplied by
LeCroy). This does not apply to WaveSurfer or WaveRunner 6000A models, which can be
recovered from their internal hard drives.
y Do not modify or remove any system fonts; doing so may affect the readability of the
dialogs.
y Do not change any display properties like Background, Appearance, Effects, or Settings.
Functionality of the scope or screen saver may be affected.
y Do not make any changes to the Windows folder.
y Do not make any changes to the BIOS settings.
y Do not make any changes to the Windows power management system.
System Restore
Although the scope creates regularly scheduled restore points automatically, before you install any
hardware or software on your instrument LeCroy strongly recommends that you manually create a
restore point. The restore point resides on the scope's hard drive, so no external storage medium
(floppy disk, USB memory stick, etc.) is required.
To Create a Restore Point
1. From the File menu, minimize or Window the scope display to reveal the task bar.
2. In the task bar, select Start, Programs, Accessories, System Tools, System
Restore.
3. Touch the Create a restore point radio button, then touch Next.
4. In the Restore point description box, indicate what software or hardware is going to
be added after the restore point is created, then touch Next.
5. The restore point will be created and a confirmation message will be displayed.