Teledyne LeCroy WaveExpert 100H Operators Manual - Manual (Page 100)

Operator’s Manual
98
WE-OM-E Rev A
Moving Traces from Grid to Grid
You can move traces from grid to grid at the touch of a button.
To Move a Channel or Math Trace
1. Touch the descriptor label for the waveform that you want to move.
Example Descriptor Label
2. Touch the Next Grid button .
Note: If you have more than one waveform displayed on only one grid, a second grid will open automatically when you
select Next Grid.
Zooming Waveforms
The Zoom button appears as a standard button at the bottom of the channel "Cx
Vertical Adjust" setup dialog if you want to create a math function zoom trace of your input
waveform. On the other hand, you can zoom a memory or math function non-zoom trace directly
without having to create a separate zoom trace. For such traces, a zoom control mini-dialog is
provided at the right of each math trace "Fx" setup dialog.
The front panel "QuickZoom" button creates multiple zooms, one for each displayed input
channel.