Teledyne LeCroy WaveExpert 100H Operators Manual - Manual (Page 244)

Operator’s Manual
242
WE-OM-E Rev A
processed further.
Example 2: Another simple math functions using VBScript
Example 3 below doesn’t use the input data at all. The middle waveform (F2) is a "golden
waveform", in this case a perfect sine (subject to 16-bit resolution), that was created using a
VBScript. The lower trace (F3) is a subtraction of the acquired waveform (upper trace) and the
golden waveform. The subtraction (of course) contains all the noise, but it also shows the presence
of a very small square wave signal.
Example 3