IAI America S-SEL-E - Manual (Page 72)

Page 67
F1 F2 F3 F4
Prog
Posi Aprg
Posi
Mdi Teac Step Etc
F1 F2 F3 F4
Mdi - 1 No 1 [1] - 8
1.234
12.345
123.456 1234.567
Inc Dec Clr Del
F1 F2 F3 F4
4. Program Mode (Press F1 at Step 3)
F1- (Posi: Position) Position Data Input (P67. 5)
F2- (Aprg: Application Program) Super SEL Program-
ming Edit Display (P72. 15)
Esc- Return to Mode Selection Display (P66.3)
5. Position (Position Data) Input Display (Step 4. Press F1)
F1- Mdi Mode (Position Data Direct Input) (P67. 6)
F2- Teac (Position Data Teaching) Mode (P70. 12)
F3- Point Step (Position Data Step) Mode (P69. 10)
F4- Return to Etc Edit Display 2 (P68. 6-2)
Esc- Return to Program Mode (P67. 4)
2. Program Mode
     Creating position data
(LCD Screen Display) (Operation)
Chapter 2. Operation
6. Mdi Mode
6-1 Position Number Input Mode (Step 5. Press F1)
Input 4-digit numbers.
F1- (Inc: Increment) Increments the position number
displayed by 1.
F2- (Dec: Decrement) Decrements the position number
displayed by 1.
F3- (Clr: Clear) Clears all data (return to 0) for reentry.
F4- (Del: Delete) Deletes input data
Return - Position Data Input (P68. 7)
Esc- Returns to Position Data Input Display (P67. 5)
Point data for Axis 1 Point data for Axis 2
Mdi - 1 No 1 [1] - 8
Cursor Position Axis Name
Axis # No. of axes connected
*This screen can only display up to a maximum of four axes.