Chapter 1. setting up – IAI America S-SEL-E User Manual
Page 7
Page 5
Part 1
Safety Precautions
The IA Super SEL Controller Type E was designed to control any type single axis IAI actuator and Type G was designed to
control any type actuator in assembly configurations using a maximum of 8 axes or integrated with other peripheral devices. It
is capable of controlling everything from a simple single axis system to large scale FA (factory automation) system. As systems
become more complicated, the possibility of incorrect operation or accidents arising from carelessness also increases. Please
take sufficient care when operating your system.
Please follow the following safety precautions when operating your IA system:
(1) Any operation not specifically addressed in this manual should not be attempted. If you have any questions, please
contact your IA sales representative or contact IA technical support at: 1-800-736-1712.
(2) Use only IA cables when connecting IA actuators and controllers. IA cables are matched for use with IA actuators and
are specially designed to withstand repeated bending.
(3) Stand clear of your IA system when operating or preparing to operate. Surround your IA system with safety partitions
if there is any possibility that someone may become injured by an operating IA system.
(4) Before assembling, adjusting, or performing maintenance on your IA system, please make sure that people around you
are aware that the system is not to be powered up or turned on. You may want to disconnect the power cable com-
pletely, keep the power cable close to the operator, or use a safety plug to ensure that the power cable will not be
plugged in inadvertently.
(5) When more than one person is working on your IA system, use signs to inform everyone of the operating status of the
equipment. Make sure that everyone stands clear prior to operation. Operate your system only after you are sure that
everyone knows that you are initiating system start-up and that everyone is clear of the system.
(6) In situations where the cables must be lengthened, be sure to double check all connections before powering up your IA
system.
Chapter 1.
Setting Up