Foreword – IAI America S-SEL-E User Manual
Page 3
Page 1
Foreword
Thank you very much for purchasing the IA Super SEL Controller E·G Type. Without knowing beforehand how to correctly use
or operate the controller, not only will the user be unable to take full advantage of all the functions built into this product but he
might inadvertently cause damage to the controller or shorten its life. Please read this manual carefully to acquire an under-
standing of the proper method of handling and operating the controller. Keep the manual handy so that you can refer to the
appropriate sections as the need arises.
Your Super SEL Controller E·G Type has a built-in 32 bit RISC (Reduced Instruction Set Computer) CPU and uses SEL
language developed exclusively by IAI for programming. The Super SEL is a highly advanced, new generation of controller
that eliminates the need for a PLC, allows you to do multi-tasking (parallel processing), and allows you to network the control-
lers with the SEL NET option.
As with our other Super SEL controllers, the Super SEL E·G Type can be used with all IAI actuators. Type E is designed for
single axis control and Type G for multiple axes control. Please use the special cable provided to connect the actuator with the
controller.
*All precautions have been taken to ensure the accuracy of the contents of this manual. However, if you become aware of any
inaccuracies or discrepancies, please contact your IAI sales representative or technical service department.