EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 96)

Issue
11.01.D
Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
86
10.4.3 Assigning Keywords in Numeric Mode
To assign keywords to a clip in numeric mode, recall the clip, then press MENU to access
the secondary clip menu on the Remote Panel.
Enter the keyword position in the list using the
F_ keys. Every time a new digit is entered,
the corresponding keyword is displayed in the highlighted area in the centre of the LCD
screen, to allow the operator to validate the entry before confirming it. If a wrong digit is
entered, press the CLEAR key to delete it. Once the right keyword is found, press
ENTER to confirm or MENU to cancel.
The rules for keyword assignment and deleting keywords are identical between LIST and
NUMERIC modes.
10.5 Searching the Database Using the
Remote Panel
Keywords and ranking assigned to clips can be used to search the clips database.
When the current element on the primary channel is a record train, the Search function is
directly available from the C position in the secondary menu. To call it, press MENU to
enter the secondary train menu, then press once the C key.
When the current element on the primary channel is a clip, the Search function is still
available from the same location, but is “hidden” behind the Name function. To call it in
this case, press MENU to enter the secondary clip menu, then press twice the C key.
In both cases, the LCD display becomes (in LIST mode):
1 player_B10123 2 2action_689012 3 keyword89012
action_889012 111A
Enter keyword # 8 with F_ keys + ENTER
Push Aux Clip Sort->TC PostRoll
>Archive *** Name Cam