How to cancel a network copy on the remote panel, 8 secondary menu in clip mode, Overview – EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual User Manual
Page 56: Secondary menu in clip mode

Issue
11.01.D
Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
46
3. Select the
COPY or MOVE function by pressing the A or B key.
The corresponding function will be highlighted on the LCD and the message on the
OSD will be updated accordingly.
4. Select the CLIP or CAM mode with the
D key.
5. Select the SHORT or LONG mode with the
C key.
6. Press
ENTER to confirm or MENU to cancel.
When doing a network copy, the VGA displays the % copied of each clip.
How to Cancel a Network Copy on the Remote
Panel
When the clip is copying, its light flashes green. Pressing
CLEAR+the corresponding F_
key allows cancelling the network copy. A confirmation screen comes up to cancel the
network copy: “Cancel network copy ? MENU: Do not cancel copy - ENTER: Cancel
copy”
9.2.8 Secondary Menu in Clip Mode
Overview
In Clip mode, the secondary menu of the Remote Panel is different from the Record Train
mode:
P
Copy Clip 113 to Clip 141
Cam A B
[Menu]: Cancel
[Enter]: Confirm
COPY
MOVE
SHORT
CLIP
PGM1 112A
*PRV1* 112B
Push
Aux Clip
Sort->TC
Post-Roll
>Archive
***
Name
Cam
P.1 B.1 Clips: Local Records: Local
PL 11: < >
Msg:
Rst Cam
Local
Sync Prv
2nd CTRL
Cam A
Cam B
Cam C
Cam D