5 how to copy a playlist from the vga clip screen, How to copy a local playlist, How to copy a distant playlist – EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual User Manual
Page 121: How to copy a playlist from the vga clip screen
Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
111
6. To specify whether to perform a Short or Long copy, select the desired value
(SHORT or LONG) pressing the
C key.
•
SHORT mode (default): only the section of the elements between the Short IN
and Short OUT as defined in the playlist will be copied, increased by the duration
of the guardbands, as defined on the destination system.
•
LONG mode: the entire original clips, including their guardbands, will be copied
on the destination system.
7. Once the various options have been decided, press
ENTER to confirm the copy, or
MENU to cancel.
The
F_ key of the destination playlist will flash until all clips have been copied. This
playlist can be recalled during that process for browsing, editing or playback. If some clips
have not yet been copied, the original network clip is used instead.
11.11.5 How to Copy a Playlist from the VGA
Clip Screen
From the VGA screen, you can copy:
•
the EDL of a playlist from the local server to the same server
•
the EDL, with or without the playlist elements, from a distant server to the local
server.
How to Copy a Local Playlist
To copy a local playlist from the VGA Clip Screen, proceed as follows:
1. From the VGA Clip Screen, open the playlist bank by pressing
END on the keyboard.
2. Select the playlist to copy and press CTRL+C.
3. Go to the empty playlist location on the same server where you want to copy the
playlist and press CTRL+V.
The EDL of the playlist is copied to the requested location.
How to Copy a Distant Playlist
To copy a distant playlist from the VGA Clip Screen, proceed as follows
1. From the VGA Clip Screen, press
F9 to open the Connect window.
2. With the ↓ and ↑ keys, select the distant server from which you want to copy a playlist
and press
ENTER.
3. On the requested page, go to playlist bank by pressing
END on the keyboard.
4. Select the original playlist to copy with the ↓ and ↑ keys and click CTRL+C.
5. Press
F9, select the local server and ENTER to come back to the local server.
6. On the requested playlist bank, select an empty playlist location on your local
machine and press CTRL+V to copy the playlist.
The following dialog box pops up: