EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 177)

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
167
Displayed Letter Function
M Allows you to mark a keyframe directly from the touch screen
or from the tablet. If this option is active, touching a point on
the screen automatically creates the keyframe. This option
becomes inactive after each keyframe creation.
C Marks CUE OUT point on current field.
S Starts slow-motion (preset in Prg Spd).
P Plays back the current clip.
<<< >>> Searches the material (clip or live recording). A single click
with the stylus move one frame forward or one frame back.
Zoom Options
On the Remote Panel display, selecting the Zoom option (soft key A) on the Remote will
cause the tracking object to be changed to the Zoom function. The circle will magnify 4x
the highlighted area of the image. This is a great feature for showing, for example, a close
call like a foot on a line or a ball in/out of bounds.
Note
The dissolve effect is not available when using the Zoom effect. The
T, S, E and
C parameters are not available either in Zoom mode.
Selecting
Zoom again will switch to Static Zoom mode. Keep in mind, when selecting the
Zoom option, that the software will take a few seconds to apply the change.
The Static Zoom allows the user to zoom an area of the picture via a picture in picture
display.