EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 171)

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
161
• Define: This option allows you to change the size of a circle.
Click on the
Define menu and follow the instructions:
o Set the centre of the circle
o Set the radius
You can then choose to save or not the new circle:
• ESC: no circle is drawn.
Ellipse Drawing (0)
Select this menu to draw ellipses. A menu allows you to choose between the following
options:
• Set centre (default): a pointer appears on the screen to let you choose the centre of
the ellipse. The shape will be the one last used or the default one if none has been
defined before.
• Define: allows you to change the shape of an ellipse, click on the Define menu and
follow the instructions:
o Set the left corner.
o Set the opposite corner.
You can then choose to save or not the new ellipse.
• ESC: no ellipse is drawn.
Arrow (A)
Select A. When you draw on the tablet and remove the pen, a «neat» arrow appears at
the end of the line. This facility remains «on». Select A again.
Color & Density (D)
Select D on the Paint Mode monitor display. Choose the desired color from the display,
then choose the desired thickness.
This will be stored as Br1 or Br2 depending on which one is currently selected when
entering the D option. Thus, two types can be stored.
Erase (E)
Selecting E on the Paint Mode monitor display allows the pen to be used as an eraser.
This facility remains «on». When no longer required, select E again to disable it and
return to the previous active drawing mode.
Clear (C)
Selecting C on the Paint Mode monitor display allows clearing of the entire drawing. Once
selected, you can choose between 3 options: Clr to clear, DfC to define customized
colors or you may escape ( ESC) this function without clearing any drawing.
If you select Define Colour (DfC), a new screen will appear including a U-V selection