EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 117)

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
107
Remaining Time
The remaining time in playlists containing growing clips with only an IN point is displayed
as --:--:-- on the screens (OSD, VGA, Remote Panel screen) where this information is
shown.
11.10.7 How to Delete Playlist Elements from a
Playlist
To delete a playlist element in a playlist using the Remote Panel, proceed as follows:
1. While you are in Playlist Edit mode, scroll within the playlist to the element that needs
to be deleted.
If the Browse mode is active, the first frame will appear on the display as each clip is
scrolled through.
2. Select Delete from the Playlist Edit menu.
The selected element will be removed from the playlist. A confirmation message will
appear if the Confirm Ins/Del clips parameter has been enabled in the Operational
Setup menu (p.3.2 F1).
11.10.8 How to Move an Element Within a
Playlist
The action to move a playlist element is described in this section as it uses the Delete
command.
To move a playlist element within a playlist using the Remote Panel, proceed as follows:
1. While you are in Playlist Edit mode, scroll within the playlist to the clip that needs to
be moved.
2. Select Delete from the Playlist Edit menu. The clip is sent to the clipboard and loaded
on the PRV channel.
3. Scroll to the location in the playlist where you want to insert the clip.
Remember that the position where the clip is inserted will depend on the value of the
Insert in playlist parameter in the Operational Setup menu (p3.1 F6), that is to say
before or after the selected playlist element.
4. Press TAKE or INSERT on the Remote Panel to insert the clip from the clipboard at
the requested location.
The playlist element is inserted at the requested location.
If the playlist element has been trimmed before being moved, the element will be
reinserted in the new position with the new guardbands.