EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual User Manual
Page 23

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
13
Function Key
Use
F9: Fill Playlist
«Dump» feature which allows all clips to be «dumped» at the end of
the current playlist. This allows the operator to save all material to
tape, as a backup feature after a show is complete. You can select in
the
Setup menu which camera angles have to be included in the Fill
Playlist function.
If your clips are currently connected to another server on the
network, the clips from that server will be added to your current
playlist.
Make sure that the playlist you have selected is an empty one. This
function will append the clips at the end of an existing playlist.
F0: Technical
setup
Gives access to the technical setup menu.
Important
In order to guarantee the validity of data and clips previously saved, it is advised
to properly exit the application by pressing
ALT+Q and ENTER from the
keyboard, or
F6 and then ENTER from the Remote Panel. DO NOT TURN OFF
THE SYSTEM WHILE THE APPLICATION IS RUNNING.