EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 26)

Issue
11.01.D
Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
16
4.1.8 FAST JOG
When selected, this option enables fast picture search: the actual speed of this fast jog is
adjustable in the Setup menu. Starting a play or returning to E2E mode resets the Fast
Jog mode.
Important
The jog dial is active at all times when the system is in play & record. The brake
is automatically turned on when starting a playback with the PLAY key or with
the lever, or when returning to E2E mode with the RECORD button.
4.1.9 LEVER
This function is used to perform slow motion from 0 to 100% and to playback material
from 100 to + 100% or from 200 to + 200% when Secondary Lever range is selected. The
lever has a continuous, linear range, except when Super Motion material is loaded on the
primary channel. In this case, there is a “flat step” at 33% (SD Super Motion) or 50% (HD
Super Motion) to help the operator locating easily the ideal playback speed.
Important
When playing Super Motion material in slow motion, to obtain the smoothest
replay, it is important that the replay speed is exactly the ideal slow motion
speed, i.e. 33% for SD Super Motion or 50% for HD Super Motion. If the replay
speed is slightly off these ideal values, movements might appear staggered.
These ideal speeds can also be called directly by pressing the PLAY button
when the current element is Super Motion. The PGM speed and Var Max
modes can also be used to facilitate this. See Chapter 6 ‘PGM-PRV Mode’ on
page 27 for a description on these modes.
4.1.10 PLST
This function is not active if the current playlist is empty. If the current playlist is not
empty, pressing PLST once enters the Playlist Edit mode.
• Pressing PLST from the Playlist Edit mode enters the Playlist Playout mode.
• Pressing PLST from the Playlist Playout mode re-cues the playlist to its beginning.
• Pressing 3 times PLST will always cue up the playlist ready to roll.
To play back a playlist that has been cued, press the PLAY button and it will roll at the
preset speeds.
4.1.11 BROWSE
When a clip is loaded on the primary channel, pressing the BROWSE key allows the
operator to browse inside all local clips of the database by turning the jog dial.
When
a cue point exists for the current picture on the primary channel (the CUE button
lights red), pressing the BROWSE key allows the operator to browse through all existing