EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 21)

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
11
3. Main Menu
Introduction
After the boot sequence of the Multicam system, the LCD screen of the Remote Control
panel will display the Main menu:
The Main menu has special function key operations as shown above, as well as the “soft”
keys options to enter 1PGM, 1PGM+PRV, 2PGM, or 3PGM modes (if available) and to
enter the Setup menu to configure your remote controller or to add special functions to
your application.
Note
If 2 channels are available for the 1
st Remote, the B key will display 2 PGM. If 3
channels are available, the B key will display 3 PGM.
How to Return to the Main Menu
From any section of the application, except Playlist mode, press SHIFT+MENU on the
first Remote Control panel to return to the main menu.
2Rec 4Play Server Ver:11.00.xx
F1: 1 Remote F6: Exit
F2: 2 Remotes F7: Clear all clips
F3: 3 Remotes F8: Stop Record
F4: 4 Remotes F9: Fill Playlist
F5: Char. On/Off F0: Save Clips+Plist
Split Paint Target Setup
1PGM+PRV 3 PGM