EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 79)

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
69
4. Press ALT+S to save the clip. The Save as window opens, giving the operator the
opportunity to name / rename the clip if needed. Pressing ENTER will save the clip to
the current cursor location in the lower section of the VDR Panel. When the Save as
window is open, the operator still has the possibility to browse the database, select a
different page and bank, and even connect to another machine on the network using
the Connect window. Pressing ALT+U will save the clip to the first available clip
location 1 in the current server.
Editing a Clip with the VDR Panel Player
After loading the desired clip, the following functions are available:
Command Description
ALT+N Renames the clip. Type the desired name and press ENTER
to confirm or ESC to cancel.
ALT+I / ALT+O Marks a new Short IN / Short OUT point on the current picture.
The cursor is automatically placed in the adjacent field, so that
the operator can manually enter the timecode of the desired
Short IN / Short OUT point if needed. Press ENTER to
confirm, or ESC to cancel.
How to Copy a Clip with the VDR Panel Player
To copy a clip with the VDR Panel Player, proceed as follows:
1. Load the original clip
2. Press ALT+S to save the current clip to another location.
This will create a copy of the clip.
The operator has the opportunity to rename the clip during this operation. He can then
save the clip to the current cursor location by pressing ENTER, or to the first available clip
location on the current server by pressing ALT+U.
Note
The Cut / Copy / Paste functions are available at any time to move and copy
clips in the lower section of the VDR Panel, even when one of the upper
windows is active.
1 The first available clip location is the first one where no camera angle is already present.