3 the function bar, F1: name, F2: clip/cam – EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual User Manual
Page 64: F3: call, F4: pref, F5: view, The function bar

Issue
11.01.D
Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
54
Note
The abbreviated word “(Loc.)” appears next to the name if the local machine is
currently selected for clips and/or for record trains. The clips displayed in the
clip screen belong to this machine.
9.3.3 The Function Bar
The second line displays the available functions. Each function can be called by the
corresponding
F_ key of the keyboard, or by clicking with stylus & tablet on the
corresponding area on this line.
F1: Name
This function is used to name a clip. For more information on how to name a clip in the
VGA, refer to the section 9.3.8 ‘How to Name a Clip’, on page 60.
F2: Clip/Cam
This function toggles between CLIP mode and CAM mode.
•
In CLIP mode, actions on a clip will use all available cameras for this clip.
•
In CAM mode, actions on a clip will only use the selected camera for this clip.
Other functions such as Name, Delete, Copy, Set TC, >Archive depend on this mode
selection.
F3: Call
The operator can gain immediate access to a local or network clip by typing its ID
number.
F4: Pref
This option changes the primary camera of a clip. For information on how to change the
primary camera of a clip, refer to the section 9.3.9 ‘How to Change the Primary Camera
of a Clip’, on page 60.
F5: View
This option changes the standard display to the extended display and vice versa. Refer to
the section 9.3.14 ‘Clip Screen - Extended View’, on page 65.