EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 66)

Issue
11.01.D
Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
56
The following functions can be used in the CONNECT window:
ALT+L: return to LOCAL mode and close the CONNECT window
ALT+C: CLIPS mode - to connect to the clips of a remote machine
ALT+R: RECORD mode - to connect to the record trains of a remote machine
ALT+P: CLIP+REC mode - to connect to the clips and record trains of a remote machine.
After selecting CLIP, RECORD or CLIP+REC mode either with the keyboard or by
clicking with the stylus, select the machine you want to connect to: click on it with the
stylus, or move with the arrow keys and press ENTER on the keyboard.
Pressing ALT+L or clicking with the stylus on “LOCAL” will close the CONNECT window
and return to local clips and record trains.
To close the CONNECT window without changing the connection mode or remote
machine, press ESC.
The “ *” next to one of the machine in the list indicates which machine is the active
network server. Refer to the Chapter 13 ‘Operating on XNet Network’, on page 151 for
details.
F0: Playlist
The Playlist screen can be accessed by selecting F10 on the keyboard.