Initial configuration, 1 application selection, Nitial – EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual User Manual
Page 13: Onfiguration

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
3
1. Initial Configuration
1.1 Application Selection
The Multicam Setup and Configuration modules are used for configuration and
maintenance operations. They are also used to select which application configuration to
run, since EVS disk recorders have the ability to run various configurations. In the
associated Multicam Setup and Configuration windows, you can also specify the channel
configuration you want to use and several audio and video parameters.
When turning on the EVS mainframe, the first step is the PC boot sequence, then the
Multicam Setup window is displayed:
•
If a default application has been previously selected, this application will start
automatically after a few seconds if no key is hit.
•
If a default application hasn't been defined or if the space bar is hit, the system will
remain in the Multicam Setup window and wait for the operator's next command.
You will find complete information about the Multicam Setup and Configuration windows
in the EVS Server Configuration manuals.