EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 109)

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
99
11.8.2 Functions Available from the VGA Playlist
Screen
To use the following commands, you must be in Playlist Edit or Playlist Playout mode:
• To enter the Playlist Edit mode, press the PLST key on the EVS Remote. The LCD
screen of the Remote displays the information about the previous, current and next
three clips of the playlist.
• To enter the Playlist Playout mode, press the PLST key again.
The following operations can be performed from the VGA playlist screen:
Criteria Description
Naming a playlist For more information, refer to the section 11.6.1 ‘How to Name
a Playlist from the VGA Playlist Bank Screen’, on page 96.
Naming the current clip For more information, refer to the section 11.6.3 'How to Name
the Current Element in the Loaded Playlist’, on page 97.
PLAY/pause Press ALT+P to start the playback / pause of the playlist from
the current position.
RECUE Press ALT+R to recue to the beginning of the playlist and
pause.
Criteria Description
NEXT Press ALT+N while the playlist is playing to force immediately
the transition to the next clip in the playlist.
SKIP Press ALT+S while the playlist is playing to skip the next clip.
The current clip will play until the defined OUT point, than the
playlist will skip the next one and play the one after instead.