EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 183)

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
173
16.5 Cue Points Related to Offside
Sequence
When an offside sequence is created, a cue point is automatically defined on two
positions:
• The position where the offside line is defined.
• The position corresponding to the preroll before the outside sequence.
When the offside mode is active, the user can press Last Cue to find back one of these
cues related to the offside sequences. Once you have reached the first cue in the train or
clip and press again on Last Cue, you come back to the last cue.