EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 20)

Issue
11.01.D
Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
10
2.6 Keyboard Locking
You can lock a remote keyboard at any time to protect it against accidental changes, for
example to prevent interruption of a play operation on an unattended device. Only the
locked device is affected, other remotes will stay fully operational.
2.6.1 Locking a Remote
To lock a remote, press the CLEAR key. Then, within 2 seconds, press the MENU key on
the keyboard.
The following confirmation message is displayed:
████████████████████████████████████████
Do you really want to lock this remote?
[Menu] : Cancel
[Enter]: Confirm
████████████████████████████████████████
Press the
Enter key to confirm the locking of the remote.
When a remote is locked:
o The CLEAR and MENU keys, used for unlocking, are flashing green.
o All other keys are continuously lighting red.
o The jog brake is activated.
o All keys, the lever and the jog beep if pressed or operated, except the CLEAR
and MENU keys, used for unlocking.
In addition, the following message is displayed in the middle of the current screen:
Msg: Clear+Menu to unlock the remote
2.6.2 Unlocking a Remote
To unlock the remote, press again the CLEAR key then, within 2 seconds, the MENU
key. The remote goes back to its operating mode.