EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 42)

Issue
11.01.D
Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
32
7. Multi PGM Mode
7.1 1/2/3 PGM modes (press A or B from
Main menu)
Multicam has two modes for its basic operation, 1 PRV/PGM mode or Multi PGM mode:
• The 1PGM+PRV mode, as described previously, is the more powerful of the two,
allowing interaction between all outputs. Here, synchronized replays can be rolled
and chained between the cameras with either a mix, a wipe, or a cut between them.
• The MULTI PGM mode is more basic, which gives the operator independent control
of all outputs.
In this mode, all outputs can be controlled together (such as jogging back to a certain
action, with all outputs) or they can be controlled individually (either PGM 1, 2, or 3).
7.1.1 Secondary Menu
The secondary menu can be called by pressing the MENU key and is similar to the
1PGM+PRV mode, except that the A function is empty since it is not possible to create a
transition between the channels in this mode. Please refer to the Chapter 6 ‘PGM-PRV
Mode’, on page 27 for description of the other functions of the secondary menu.
PGM1 CAM A *PGM2* CAM B PGM3 CAM C
Aud.Met. PgmSpd Sort->TC Post-Roll
Sw to IN Search Pref
P.1 B.1 Clips: LOCAL Records: LOCAL
PL 11: <
Msg:
Rst Cam Local Sync To 2nd CTRL
PGM 1 PGM 2 PGM 3 TOGGLE