Clip/cam, 9 how to search for clips by timecode, Procedure – EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual User Manual
Page 60: How to search for clips by timecode, On 9.2.9, Ge 50

Issue
11.01.D
Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
50
Clip/Cam
Pressing the
D key will toggle between CAM and CLIP modes on the remote. Please note
that this mode on the remote and on the VGA screens is never synchronized. In CAM
mode, the Push, Archive, Ranking assignment, Keyword assignment, and Name
functions will apply only to the camera angles of the clip loaded on the controlled
channels. In CLIP mode, these functions will apply on all camera angles of the clip.
9.2.9 How to Search for Clips by Timecode
Note
The Reset function resets all default parameters, including the ones related to
the material and the TC type to search on.
Procedure
To search for clips or trains containing a specific TC, proceed as follows:
1. From the main Remote screen in Clip mode or Train mode, press
MENU to access
the secondary menu.
2. Press
SHIFT+C to access the Sort TC function.
The following screen is displayed:
3. If requested, press
SHIFT+C to define a date from which the search should be
applied:
a. Type the date in dd/mm/yy format with the
F1 to F10 keys.
b. Press
ENTER to confirm and exit the field.
4. If requested, press
SHIFT+D to define a date to which the search should be applied:
a. Type the date in dd/mm/yy format with the
F1 to F10 keys.
b. Press
ENTER to confirm and exit the field.
5. Press the
B key to specify whether to search for clips (Clip), train (Rec) or both
(Clip+Rec).
Press several times the
B key to select the requested value.
6. Press the
C key to specify whether to search for the LTC (LTC), the user-defined
Sort TC xx:xx:xx:xx
[Menu] : Cancel
[Enter] : Search
Reset
Set TC
From Date To Date
Return
Clip
LTC
Srch Net