EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 63)

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
53
9.3 Using the Clip screen
The VGA Clip screen is accessed by selecting the F9 key on the keyboard. With this
screen, clips can be recalled using the pen and tablet or directly from the keyboard.
Important
The action performed on a channel from the Clip screen is concurrent to any
other controller that might be assigned to that channel: EVS Remote Panel or
external protocol. A command sent from the Clip screen to a channel will
overwrite whatever the channel was doing at that time.
9.3.1 Clip screen – Standard View
The navigation through the Clip screen, and the various functions available on this
screen, can be performed using the tablet and stylus, or the keyboard shortcuts.
9.3.2 The Title Bar
The Title bar contains the status information:
• Number and name of the server currently selected for clips and for record trains (*).
The name is blinking red if it is a network machine.
• Total number of clips (i.e. protects, 1 camera angle counting for 1 clip in this count)
• Total duration of all clips
• Remaining capacity on the server (all record trains together; valid for local server
only)