Cue points management – EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual User Manual
Page 199
Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
189
o The CAM key selecting a recorded block while another is recording or playing
stops the current play or record action and loads the block last frame frame (first
selection) or the last displayed frame (further selections).
o The CAM key selecting an empty block stops the current play or record action
and displays the live flow.
Cue points management
•
When a new ARM/REC command is issued on a block, all its cue points are cleared.
•
If the
Last Cue command cannot access the desired TC-pre-roll, the player remains
on the current cue point. Pre-roll is available and there is no remote beep.
•
If the
Last Cue command refers to a TC that does not exist anymore, the player
remains on the last cue point. Pre-roll is available and there is no remote beep.
•
Cue points can not be marked when working on several memory blocks.