EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 145)

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
135
In dual stereo mode
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix 02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
00:10
3→1 3→3
4→2 4→4
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999
In stereo mode
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix 02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
00:10
2→1
2→2
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999
One can set as many swap points as needed.
If only an IN swap point is set for one clip, the audio tracks will be reset by default for the
next clip in the playlist.
Please note that when a swap point is set, a cross-fade is played between the original
audio track and the new track. The duration of the cross-fade is the default audio
transition.
When a swap point is present in a playlist, the display on the VGA and on the OSD
changes: a “*” is added next to the audio Fx information.
Display on the VGA
Display on the OSD
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix*02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27