EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 113)

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
103
MakeLoc
The MakeLoc (Make Local) function (B key) offers the possibility to copy locally remote
clips in a playlist. In the playlist secondary menu, select on the B position MakeLoc.
When the function is called, the remote clips are replaced by short copies of the local
ones as soon as they are available.
Undo/Redo
The last modifications of a playlist can be undone/redone for as long as the operator does
not exit the Playlist mode (e.g.: returning to Live).
Pressing the
Undo command (D key) will undo the last modification. Up to 9
modifications can be undone. Once a modification has been undone, it is possible to redo
it by pressing the Redo key (C key).
OtherAng
The OtherAng (Other Angle) function (SHIFT+C key) allows the operator to replace the
current playlist element by another playlist element showing a different angle of the
recorded material.
When the
OtherAng option is selected, Multicam loads the local and network trains that
include the TC IN of the playlist element to replace. The trains are loaded on the PRV
channel, at the current TC of the loaded element. The jog is used to shift from one record
train to the other.
Once the requested record train is displayed on the PRV channel, pressing
ENTER
replaces the current playlist element by the one created from the selected angle.
See also the section 11.10.9 ‘How to Change the Camera Angle of a Playlist Element’, on
page 108.
Add cut
The Add cut function (SHIFT+D key) allows the operator to split an existing clip into two
independent clips at a selected point. Both resulting clips are duplicates of the original
one with additional short-in and short-out points added at the split point.
For more information, refer to the section 11.12 ‘Adding Cut in Playlist Elements’ on page
112.