RIGOL DP832A - Manual (Page 99)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-75
:PRESet:USER[]:SET:SURE
Syntax :PRESet:USER[]:SET:SURE
Description Confirm the parameter and status settings of the specified user-defined setting.
Parameter Name Type Range Default
[] Discrete 1|2|3|4 None
Explanation  Executing this command will save the channel voltage, current, OVP and OCP
status, OVP and OCP values, channel track status as well as the OTP status of
the specified user-defined setting.
 When [] is 1, 2, 3 or 4, the system sets the related parameters of the first,
second, third or fourth group of user-defined setting respectively. When []
is omitted, the system sets the parameters of the user-defined setting
currently selected by default.
:PRESet:USER[]:SET:TRACk
Syntax :PRESet:USER[]:SET:TRACk {ON|OFF}
:PRESet:USER[]:SET:TRACk?
Description Enable or disable the track function of the current channel in the specified
user-defined setting.
Query the status of the track function of the current channel in the specified
user-defined setting.
Parameter Name Type Range Default
[] Discrete 1|2|3|4 None
{ON|OFF} Bool ON|OFF OFF
Explanation  This command is only applicable to channels supporting the track function:
CH2 and CH3 of DP831A/DP831 as well as CH1 and CH2 of DP832A/DP832.
 When [] is 1, 2, 3 or 4, the system sets the related parameters of the first,
second, third or fourth group of user-defined setting respectively. When []
is omitted, the system sets the parameters of the user-defined setting
currently selected by default.
 By default, this command sets the status of the track function of the channel
currently selected. For multi-channel models, if you want to set the parameters
of other channels, please use
the :INSTrument:NSELect , :INSTrument[:SELEct] or :INSTrument[:SELect]
command to set the desired channel as the current channel.
Return Format The query returns ON or OFF. For channels that do not support the track function,
the query returns NONE.
Example :PRES:USER1:SET:TRAC ON /*Enable the track function of the current channel in
the first group of user-defined setting*/
:PRES:USER1:SET:TRAC? /*Query the status of the track function of the
current channel in the first group of user-defined
setting and the query returns ON*/
Related
Commands
:INSTrument:NSELect
:INSTrument[:SELEct]
:INSTrument[:SELect]