RIGOL DP832A - Manual (Page 213)

Chapter 5 Appendix RIGOL
DP800 Programming Guide 5-7
Appendix B: Factory Setting
Note: These parameters with * don’t change when the instrument is restored to its factory settings
(restarting the instrument when "Default" is selected in Utility  System PowerOn or sending the
*RST command can restore the instrument to its factory settings).
Channel Parameters
DP831A
Voltage/Current Setting Values
CH1: 0.000V/5.0000A
CH2: 00.000V/2.0000A
CH3: -00.000V/2.0000A
Voltage/Current Limits
CH1: 8.800V/5.5000A
CH2: 33.000V/2.2000A
CH3: -33.000V/2.2000A
OVP/OCP On/Off CH1/CH2/CH3: Off/Off
Output On/Off CH1/CH2/CH3: Off
Track On/Off
CH1: None
CH2/CH3: Off
Current Channel CH1
DP832A
Voltage/Current Setting Values
CH1: 00.000V/3.000A
CH2: 00.000V/3.000A
CH3: 0.000V/3.000A
Voltage/Current Limits
CH1: 33.000V/3.300A
CH2: 33.000V/3.300A
CH3: 5.500V/3.300A
OVP/OCP On/Off CH1/CH2/CH3: Off/Off
Output On/Off CH1/CH2/CH3: Off
Track On/Off
CH1/CH2: Off
CH3: None
Current Channel CH1
DP821A
Voltage/Current Setting Values
CH1: 00.000V/1.0000A
CH2: 0.000V/10.000A
Voltage/Current Limits
CH1: 66.000V/1.1000A
CH2: 8.800V/11.000A
OVP/OCP On/Off CH1/CH2: Off/Off
Output On/Off CH1/CH2: Off
Sense On/Off
CH1: None
CH2: Off
Current Channel CH1
DP811A
Voltage/Current Setting Values 00.000V/05.0000A
Voltage/Current Limits 22.000V/11.0000A
OVP/OCP On/Off Off/Off
Output On/Off Off
Sense On/Off Off
Current Range Range1
DP831 [1]
Voltage/Current Setting Values
CH1: 0.000V/5.000A
CH2: 00.00V/2.000A
CH3: -00.00V/2.000A
Voltage/Current Limits
CH1: 8.800V/5.500A
CH2: 33.00V/2.200A
CH3: -33.00V/2.200A
OVP/OCP On/Off CH1/CH2/CH3: Off/Off
Output On/Off CH1/CH2/CH3: Off