RIGOL DP832A - Manual (Page 155)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-131
:TIMEr:GROUPs
Syntax :TIMEr:GROUPs
:TIMEr:GROUPs?
Description Set the number of output groups of the timer.
Query the current number of output groups of the timer.
Parameter Name Type Range Default
Integer 1 to 2048 1
Explanation  The number of output groups is defined as the number of groups of preset
voltage/current values that the power supply outputs in each cycle.
 The total number of groups in timing output = the number of groups × the
number of cycles; wherein, the number of cycles is set by the :TIMEr:CYCLEs
command.
 The power supply will terminate the timer function when the total number of
groups of outputs is finished. At this point, the state of the power supply
depends on the setting of the :TIMEr:ENDState command.
Return Format The query returns an integer from 1 to 2048, for example, 25.
Example :TIME:GROUP 25 /*Set the number of output groups of the timer to 25*/
:TIME:GROUP? /*Query the current number of output groups of the timer and
the query returns 25*/
Related
Commands
:TIMEr:CYCLEs
:TIMEr:ENDState