RIGOL DP832A - Manual (Page 37)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-13
:DELAY:ENDState
Syntax :DELAY:ENDState {ON|OFF|LAST}
:DELAY:ENDState?
Description Set the end state of the delayer.
Query the end state of the delayer.
Parameter Name Type Range Default
{ON|OFF|LAST} Discrete ON|OFF|LAST OFF
Explanation  The end state refers to the state of the instrument when the delayer stops. The
power supply will terminate the delayer function when the total number of
groups of delays is finished or when the state that meets the "stop condition"
(the :DELAY:STOP command) is detected.
 ON: output on, the instrument turns on the output automatically; OFF: output
off, the instrument turns off the output automatically; LAST: last state, the
instrument stops at the output state of the last group.
 The total number of groups of the delay output = the number of groups × the
number of cycles. Wherein, the number of groups is set by the :DELAY:GROUPs
command and the number of cycles is set by the :DELAY:CYCLEs command.
Return Format The query returns ON, OFF or LAST.
Example :DELAY:ENDS LAST /*Set the end state of the delayer to Last*/
:DELAY:ENDS? /*Query the current end state of the delayer and the query
returns LAST*/
Related
Commands
:DELAY:STOP
:DELAY:GROUPs
:DELAY:CYCLEs