Measure:current[:dc, Measure:power[:dc, Measure:current[:dc]? -35 – RIGOL DP832A User Manual

Page 59: Measure:power[:dc]? -35, Measure:current[:dc]? :measure:power[:dc

Chapter 2 Command System

RIGOL

DP800 Programming Guide

2-35

:MEASure:CURRent[:DC]?

Syntax

:MEASure:CURRent[:DC]? [CH1|CH2|CH3]

Description

Query the current measured on the output terminal of the specified channel.

Parameter

Name

Type

Range

Default

[CH1|CH2|CH3]

Discrete

CH1|CH2|CH3

None

Explanation

 If [CH1|CH2|CH3] is omitted, the command queries the current measured on

the output terminal of the channel currently selected.

 You can also send the

:MEASure[:VOLTage][:DC]?

and

:MEASure:POWEr[:DC]?

commands to query the voltage and power

measured on the output terminal of the specified channel respectively, or send

the

:MEASure:ALL[:DC]?

command to query the voltage, current and power

measured on the output terminal of the specified channel at the same time.

Return Format

The query returns the current measured on the output terminal of the specified

channel, for example, 0.0500.

Example

:MEAS:CURR? CH1 /*Query the current measured on the output terminal of CH1

and the query returns 0.0500*/

Related

Commands

:MEASure[:VOLTage][:DC]?
:MEASure:POWEr[:DC]?
:MEASure:ALL[:DC]?

:MEASure:POWEr[:DC]?

Syntax

:MEASure:POWEr[:DC]? [CH1|CH2|CH3]

Description

Query the power measured on the output terminal of the specified channel.