RIGOL DP832A - Manual (Page 129)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-105
:STORe Commands
Command List:
 :STORe:LOCal
 :STORe:EXTErnal
:STORe:LOCal
Syntax :STORe:LOCal {1|2|3|4|5|6|7|8|9|10},
Description Store the current instrument state to the specified location in the internal memory of
the instrument with the specified filename.
Parameter Name Type Range Default
{1|2|3|4|5|6|7|8|9|10} Discrete 1|2|3|4|5|6|7|8|9|10 None
ASCII string
Refer to the
"Explanation"
None
Explanation  {1|2|3|4|5|6|7|8|9|10} represent the corresponding storage locations in the
internal memory of the instrument respectively.
 If a state file has already been stored in the specified storage location, this
command will directly save the current instrument state to the specified storage
location (overwrite the original file directly). If the state file stored in the
specified storage location is locked (refer to the :MEMory[:STATe]:LOCK
command), this command is invalid (will not overwrite the original file).
 is the specified filename (does not include the filename suffix
".RSF") and cannot exceed 9 bytes (1 Chinese character occupies 2 bytes).
 You can also send the *SAV or :MEMory[:STATe]:STORe command to store the
current instrument state to the specified storage location in the internal memory
of the instrument.
Example :STOR:LOC 1,123 /*Store the current instrument state to storage location 1 of
state file in the internal memory of the instrument with the
filename "123.RSF"*/
Related
Commands
*SAV
:MEMory[:STATe]:LOCK
:MEMory[:STATe]:STORe