RIGOL DP832A - Manual (Page 84)

RIGOL Chapter 2 Command System
2-60 DP800 Programming Guide
:OUTPut:OVP[:STATe]
Syntax :OUTPut:OVP[:STATe] [CH1|CH2|CH3,]{ON|OFF}
:OUTPut:OVP[:STATe]? [CH1|CH2|CH3]
Description Enable or disable the overvoltage protection (OVP) function of the specified
channel.
Query the status of the overvoltage protection (OVP) function of the specified
channel.
Parameter Name Type Range Default
[CH1|CH2|CH3] Discrete CH1|CH2|CH3 None
{ON|OFF} Bool ON|OFF OFF
Explanation  When the overvoltage protection function is enabled, the output will turn off
automatically when the output voltage exceeds the overvoltage protection
value currently set ( :OUTPut:OVP:VALue ). You can send
the :OUTPut:OVP:ALAR? or :OUTPut:OVP:QUES? command to query whether
overvoltage protection occurred on the specified channel currently.
 When [CH1|CH2|CH3] is omitted, the system performs the corresponding
operation on the current channel.
Return Format The query returns ON or OFF.
Example :OUTP:OVP CH1,ON /*Enable the overvoltage protection function of CH1*/
:OUTP:OVP? CH1 /*Query the status of the overvoltage protection function
of CH1 and the query returns ON*/
Related
Commands
:OUTPut:OVP:ALAR?
:OUTPut:OVP:QUES?
:OUTPut:OVP:VALue