RIGOL DP832A - Manual (Page 114)

RIGOL Chapter 2 Command System
2-90 DP800 Programming Guide
[:SOURce[]]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
Syntax [:SOURce[]]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
{|MINimum|MAXimum}
[:SOURce[]]:VOLTage[:LEVel][:IMMediate][:AMPLitude]?
[{MINimum|MAXimum}]
Description Set the voltage of the specified channel.
Query the voltage of the specified channel.
Parameter Name Type Range Default
[] Integer 1|2|3 1
Real Refer to Table 2-1
Explanation  When [:SOURce[]] or [] is omitted, the command sets the parameter
of the channel currently selected by default.
 When is selected, the system sets the voltage of the specified
channel directly; when MINimum or MAXimum is selected, the system sets the
voltage of the specified channel to the minimum or maximum (refer to Table
2-1) within the voltage range of this channel (multi-channel models) or the
range currently selected of this channel (single-channel model); when UP or
DOWN is selected, the system increases or reduces the voltage at the step set
by the [:SOURce[]]:VOLTage[:LEVel][:IMMediate]:STEP[:INCRement]
command.
 You can also send the :APPLy command to set the voltage and current of the
specified channel.
Return Format The query returns the voltage setting value of the specified channel, for example,
7.500.
Example :VOLT 7.5 /*Set the voltage of the current channel to 7.5V*/
:VOLT? /*Query the voltage setting value of the current channel and the query
returns 7.500*/
Related
Commands
:APPLy
[:SOURce[]]:VOLTage[:LEVel][:IMMediate]:STEP[:INCRement]