Trigger[:sequence]:delay, Trigger[:sequence]:delay -157 – RIGOL DP832A User Manual
Page 181
RIGOL
DP800 Programming Guide
2-157
:TRIGger[:SEQuence]:DELay
Syntax
:TRIGger[:SEQuence]:DELay {
:TRIGger[:SEQuence]:DELay?
Description
Set the trigger delay.
Query the current trigger delay.
Parameter
Name
Type
Range
Default
Integer
0s to 3600s
0s
Explanation
Trigger delay refers to the time from when the trigger is detected on the
specified trigger source to when the corresponding output changes
accordingly.
The trigger delay is only valid when the trigger source is set to "BUS" (bus
trigger, namely software trigger).
When the trigger source (
) is set to "IMM" (immediate trigger), the system
executes a complete trigger operation (the voltage/current of the specified
channel changes to the trigger voltage/current currently set immediately)
immediately after executing the
command and there is no delay.
When the trigger source (
) is set to "BUS" (bus trigger, namely software trigger),
the system generates a trigger by executing the
trigger system. Then, the power supply executes a trigger operation (the
voltage/current of the specified channel change to the trigger voltage/current
currently set) after the specified delay time (if the delay time is
When trigger coupling is currently set, for all the coupling channels, the trigger
delay time is the same (the value set by this command).
Return Format
The query returns an integer from 0 to 3600, for example, 3.
Example
:TRIG:DEL 3 /*Set the trigger delay to 3s*/
:TRIG:DEL? /*Query the current trigger delay and the query returns 3*/
Related
Commands